Installation Manual for The W463 Electric Brake Controller Harness for 2014-On Mercedes G Class Models

Installation Manual - W463 Electric Brake Controller Harness


Exclusively for Mercedes-Benz Geländewagen W463 from 2014 On

W463 Electric Brake Controller Harness for 2014 - on Mercedes G550 VTS-7159-14 

Part List

W463 Electric Brake Controller Harness VTS-7159-14

  1. Plug & Play Harness
  2. 4-pin Connector body for Electronic Brake Controller
  3. Connector Pins, male, crimp-on (4 pcs.) 

Brake Harness Install In Car Diagram for Mercedes G-Class 2014 and Up - VTS-7159-14 

 

Open the access panel for the Rear SAM Unit

Instructions for opening the access panel for the Rear SAM Unit - Merecedes Gwagen 

Remove the above indicated corner of the metal cover for Brake Controller Harness access.

 

Rear SAM Fuse and Control Unit 

Rear SAM Fuse and Control Unit in Mercedes G550 

X-58/28 Connector

X-58/28 Connector in Mercedes Gwagen 

 

Connect the harness to the green X-58/28 plug housing next to the SAM unit.

Install the Brake Control Harness forward to the driver’s foot room / Electric Brake Controller Location.

 Install the Brake Control Harness forward to the driver’s foot room / Electric Brake Controller Location

 

Choose the best location to mount the Electronic Brake Controller (supplied by others)

Electronic Brake Controller Location in Gwagon

 

Use the provided 4-pin connector housing and the 4 male crimp-on pins to make the connections with the Electronic Brake Controller.

Please be sure to match the wire colors from the harness with the ones from the controller – see below.

4-pin connector housing and the 4 male crimp-on pins connected with the Electronic Brake Controller

TOP